RCD360 PRO2 Wired Carplay Android auto Assistance & FAQs

🔌 1. Power Cable Not Compatible / Doesn’t Fit

Issue: The power cable does not match the original car plug.

Solutions:

✅ If your original car plug is a large quadlock plug, you can directly use our standard power cable.
🔌 If your car uses an ISO plug, you’ll need to purchase the special Plug-B for ISO. [Click here for the product link]
🔄 If your car has an MQB plug, you can connect it directly to our head unit without using our power cable.

🛠️ 2. Original Car Wiring Modified / Aftermarket Wiring

Issue: The original car wiring has been modified or previously customized, causing incompatibility. especially can signal caused the can signal is not fit .

Solution:
Please contact customer service and send a photo of your original car plug so we can help identify the correct solution.

🔋 3. Car Battery Drain Issue / Stereo Cannot Fully Power Off

Issue:
Your stereo does not completely shut down after turning off the ignition. Common symptoms include:

The stereo can still be powered on after removing the car key.
The button backlight stays illuminated.
CarPlay or Android Auto remains connected even when the vehicle is off.

Cause:
This issue is not caused by the head unit itself, but by an outdated CAN Gateway version in your car, which fails to properly transmit the shutdown signal via CAN communication.

Diagnosis Checklist:

Headlight Sync Test:
Turn the headlight knob on/off — does the stereo's button backlight turn on/off accordingly?
→ ✅ If yes, CAN signal is partially working.
Bluetooth Test:
Is Bluetooth functioning normally?
→ ✅ If yes, some signals are working, but shutdown communication is missing.

Solution:
To resolve this, use our exclusive yellow “power drain fix wire”:

If this yellow wire was not included in your package, please contact us. We’ll send it to you free of charge.
Follow the steps in this wiring instruction video to connect the yellow wire correctly.

📡 4. Poor FM/AM Signal or Incompatible Antenna Plug

Issue:
The radio receives poor or no FM/AM signal. Common symptoms:

Weak or no signal
Very few stations during auto-scan
Static or noise during playback

Product Specs:
Our head unit supports the following radio frequency ranges:

AM: 530 – 1600 KHz
FM: 87.5 – 108 MHz

Possible Causes & Solutions:

Check antenna connection and orientation:
- Our default antenna plug is compatible with most vehicles.
- If you’re experiencing poor signal, try reversing/flipping the antenna connector direction and ensure it is firmly connected.
Antenna adapter needed for some models:
- If your original power plug looks like the one shown below, you may need an additional antenna adapter.
  Double Facra: Double separate Facra

5. 📱 CarPlay Not Connecting

Issue:
Your iPhone is not connecting to the CarPlay system.

Troubleshooting Steps:

Check the USB cable:
- Make sure the cable is properly recognized by the stereo.
- Try using several different original Apple cables to rule out cable issues.
Check your iPhone system:
- We recommend resetting the phone settings or testing with another iPhone to determine if the issue is phone-related.
Check the USB port on the head unit:
- Ensure the USB port is not loose or damaged.
- Try gently adjusting the cable to see if the connection is intermittent.

🚨 Still not working?
Please contact us for further assistance. We're here to help.

6. 🎥 Reverse Camera Not Working

Issue:
The rearview camera does not display properly or does not activate when shifting into reverse.

⚠️ Attention:
After installing the camera, please close the trunk and test again.
Sometimes the reverse lights may not function properly when the trunk is open, which can cause the camera not to receive power or signal.

✅ Recommended Solution:

We strongly recommend purchasing a Scumaxcon-brand rear camera, as our RCD360 series only supports:

AV (CVBS) signal input
NTSC TV system only

Many customers who bought third-party cameras have encountered compatibility issues.
Here are the official camera options we offer:

Universal camera (standard mount) Manual:
Handle camera with dynamic guidelines Manual
VW flip logo camera : Manual

📋 Next Steps if Your Camera Still Doesn’t Work:

Please identify which type of camera you are using:

RGB Camera (used with original RCD510, RNS510, RNS315, etc.)
- RGB cameras are not directly compatible with RCD360 series units.
- However, we offer a detailed installation guide for converting and using the original RGB camera with RCD360 PRO2.
📖 Please read this step-by-step blog guide:
👉 Installation Guide for Original RGB Rear Camera with RCD360 PRO2
If your original head unit was an MIB system, your factory rear camera should be directly compatible with our RCD360 without any additional adapters.

3. Using an Aftermarket (Non-OEM) Camera

If you are using a third-party/aftermarket rear camera, please check the following:

✅ Compatibility Checklist

Make sure your camera supports:
- AV format with CVBS signal
- NTSC TV system

⚠️ Note: Cameras not supporting these formats are not compatible with our RCD360. If your camera does not meet these requirements, we strongly recommend returning it and purchasing our compatible camera.

🛠️ Time delayer wire Requirement

Most aftermarket cameras require a delay wire to ensure proper image display timing.

What does the time delayer wire do?
It stabilizes the power and video signal during reverse gear shifting.
What happens if it's missing?
- The screen may show no signal or black screen
- The image may flicker or appear with delay/lag
- The camera may only show up after a few seconds, or not at all

Please check your camera package for this delay wire. or contact with the rear camera seller .

📩 Still Not Sure?

If you're unsure whether your camera is compatible:

Please send us the product link to your camera.
Our support team will help you verify if it can work with our stereo.
Or check out our own compatible cameras: