Installation Instructions for Standard Universal Camera-camera6+RCD362pro2

Attention:

After installing the camera, please test it by closing the trunk to avoid the camera not working due to the reverse lights not functioning. If you still encounter installation issues, please refer to the instructions and contact our customer service. 99% of the problems can be resolved.

If your car is not built-in camera, we recommend purchasing our company's camera to ensure normal use of the product.

[camera6] https://www.scumaxcon.com/products/av-input-rcd330-ruckfahrkamera-einparkhilfe-lizenzinhaber-autokamera-schwarz?_pos=1&_sid=960cb383a&_ss=r

If you choose our  Standard Universal Camera ,

Open the hood and close the trunk before installation!!

Test the camera first, and wire it when the image appears normally.

Here is the wiring connection guide  : 

-This is a detailed diagram of the power connector. It includes various scenarios, and you can refer to the parts you need.

If your car is installed with an after-market camera, please follow the instructions to connect the AV cable and the reverse detection cable. In most cases, it can be used normally. If there is a flash and then black screen issue on some models, please contact us for a free delay timer.

We could not make sure our RCD360pro2 could work with other store's camera well  . hope your understanding :) 

Open the hood and close the trunk before installation!!

Test the camera first, and wire it when the image appears normally.