Customer Service Blogger — RCD360pro2

▶If the speaker is no sound after installed the new radio, there are two possible reasons: 1)If the left or right speaker is not working, it is very likely that the speaker wire is not making good contact.You first check whether the pins of the speaker on the power adapter are in good contact. The power plug may loosen or deform the speaker pins during wiring, causing poor contact. As shown in the right figure, please check whether it is loose. After connecting the power cord, if the speaker pin is loose, you can plug it in directly to make...

Attention: After installing the camera, please test it by closing the trunk to avoid the camera not working due to the reverse lights not functioning. If you still encounter installation issues, please refer to the instructions and contact our customer service. 99% of the problems can be resolved. [YX2216 connect guide]:https://www.youtube.com/watch?v=H0u9xO1cTL0 ................................................................................................................................ If your car has a original  factory back camera , please check the picture below and judge whether your camera is RGB or not  .As our experience , if your original  radio is RNS510/315/RCD510,the factory back camera is RGB .     ---If you still want to keep...

Attention: After installing the camera, please test it by closing the trunk to avoid the camera not working due to the reverse lights not functioning. If you still encounter installation issues, please refer to the instructions and contact our customer service. 99% of the problems can be resolved.   If your car is not built-in camera, we recommend purchasing our company's camera to ensure normal use of the product. [camera6] https://www.scumaxcon.com/products/av-input-rcd330-ruckfahrkamera-einparkhilfe-lizenzinhaber-autokamera-schwarz?_pos=1&_sid=960cb383a&_ss=r If you choose our  Standard Universal Camera , Open the hood and close the trunk before installation!! Test the camera first, and wire it when the image appears normally. Here is...

Track camera user manual   Attention: After installing the camera, please test it by closing the trunk to avoid the camera not working due to the reverse lights not functioning. If you still encounter installation issues, please refer to the instructions and contact our customer service. 99% of the problems can be resolved.   If you choose the track camera from our store , please read the manual  first , and folow the stpes to connect that :  [THCM01] https://www.scumaxcon.com/products/rcd330-oem-av-car-rear-view-camera-track-trunk-handle-for-vw-golf-polo-passat-cc?_pos=2&_sid=e3ca8124b&_ss=r   Open the hood and close the trunk before installation!! Test the camera first, and wire it when the image appears...

 Attention:  The RCD360pro2 radio has 2 versions, “Backup camera activated” and “Backup camera deactivated”. ▶If your car has installed the backup camera already, please choose the version “Backup camera activated”. ▶If there is no backup camera on your car, please choose the version “Backup camera deactivated”. If you make an incorrect purchase, You could ask a change or please encode the camera setting. You need to use VCDS to turn on/off the rear camera function. Enter 56-Radio, choose 3 bite. change "40" to "00". After that please long press the "Power" buttons more than 20 seconds to restart the radio. Here is...